Cellulose nanofiber

Product Name ０１ Cellulofibril

Product features

• Feature01

  ...

  Wet mechanical defibration allows cellulose to be adjusted to various sizes.

• Feature02

  ...

  Various cellulose raw materials can be selected, including wood pulp and non-wood pulp.

• Feature03

  ...

  Large volume and low cost supply is available.

• Fibers before treatment
• Fibers after treatment
• Raw materials

Uses with expected applications

• Material for protection against abrasives
• Raw materials for compounding into various resins
• Cosmetic supplements

Fiber properties table

• Before treatment
• Low processing level
• High processing level

Flexible response based on fiber size × required quantity

Large fiber size = high producibility, enabling mass production (approx. 30 tons/month).
The finer the fiber, the lower the producibility will be.

TENTOK can, upon request,
handle a wide range of fiber sizes.

Cellulofibril
lineup

There are two main types of cellulose raw materials: wood-derived and non-wood-derived (e.g., plant fiber).
Examples of non-wood materials include plant fibers such as cotton linter (cotton), recycled cellulose, kenaf, and hemp.
Wood pulp comes as softwood or hardwood, and we use these raw materials for papermaking.
In addition, we can also accommodate small-quantity samples and materials not listed in the table upon request.

Non-wood pulp

• ・Cotton linter
• ・Regenerated cellulose, etc.

Regenerated cellulose

Wood pulp

• ・Softwood (white/brown)
• ・Hardwood (white/brown), etc.

Softwood pulp

Productive capacity

For approximate production capacity, please see below.
Note: This is only a rough estimate, and actual processing capacity will vary depending on the level of defibrillation.